Water and Wastewater

Essential equipment is often located in areas such as pump wells, wet wells, valve chambers, aeration tanks, treatment channels, and underground assets, where space is limited and conventional lifting equipment cannot be easily deployed. Restricted access routes make it difficult to transport equipment to the point of use, while uneven ground, existing infrastructure, and live operational processes further complicate lifting activities. These constraints not only slow maintenance and inspection work, but can also increase the risks associated with manual handling, working at height, and confined space entry.

Reid helps overcome these challenges through a range of lightweight, portable lifting and safety systems designed specifically for environments where access is limited.

Products such as the Porta Gantry, Porta Davit, TDavit, and PortX Tripod can be transported by hand, positioned through narrow access points, and assembled by a small team without the need for heavy machinery. Their modular, configurable designs allow them to adapt to different structures, space restrictions, and lifting requirements, while providing safe lifting, personnel access, rescue, and fall protection capabilities.

Change is a constant across the water and wastewater industry. From ageing treatment works and pumping stations to recently upgraded facilities and new builds, every site presents a different set of challenges. Layouts, asset locations, access routes, lifting points, and operational requirements can vary significantly, even between sites performing the same function.

This variation can make work considerably more difficult when lifting equipment lacks flexibility. A system that performs well on one site may be unsuitable for the next, leading to inefficiencies, additional equipment requirements, and increased setup time. As infrastructure evolves, equipment must be capable of adapting to different spaces, working heights, lifting loads, and site conditions without compromising safety or productivity.

Reid helps organizations respond to this challenge with a range of highly adaptable lifting and safety solutions. Products such as the Porta Gantry, Porta Davit, and TDavit can be configured to suit a wide variety of applications, asset types, and site conditions. Modular designs, adjustable configurations, and a broad range of accessories allow the same system to be deployed across multiple locations and tasks, reducing the need for site-specific equipment. Whether work is reactive or planned, Reid solutions provide the flexibility needed to safely access, lift, lower, and protect personnel across an ever-changing water and wastewater infrastructure network.

Water and wastewater maintenance rarely takes place in controlled conditions. Teams are often required to work around open tanks, deep chambers, pump stations, treatment processes, and remote assets where environmental conditions can change quickly. From slippery surfaces and uneven ground to corrosion, poor visibility, and potentially hazardous atmospheres, maintaining control of lifting operations while protecting personnel is a constant challenge.

These demanding environments place significant pressure on both equipment and operators. Lifting systems must remain stable and reliable on varied terrain, while personnel often need safe access around water, chemicals, biological hazards, and restricted work areas.

Reid helps water and wastewater operators work safely in these challenging conditions with lifting and access solutions designed for harsh environments. Products such as the Porta Gantry, Porta Davit, TDavit, and PortX Tripod are manufactured from high-grade marine aluminum with anodised finishes, providing excellent corrosion resistance in wet, chemical, and outdoor environments. Lightweight yet robust, they can be deployed quickly wherever work needs to take place while providing safe lifting, personnel access, rescue, and fall protection capabilities.

The ability to respond effectively to both planned and reactive activities is essential; while planned activities allow teams to assess risks, organise equipment, prepare safe lifting operations in advance and potentially reduce costs, reactive activities can become significantly more expensive and operationally challenging, often forcing teams to respond without ideal equipment, access or preparation, increasing safety risks.

Lifting equipment such as the Porta Gantry Rapide, TDavit variations and PPE systems such as the PortX Tripod, PortX Davit XR and PortX Pole Hoist provide a practical advantage, as they are designed to for rapid deployment allowing teams to start operations quickly, efficiently and safely.

Lightweight modular components can be transported easily, assembled by 1-2 operators and require minimal tools, if any, reducing logistical challenges often associated with urgent maintenance activities.

Strict regulatory requirements are a constant challenge across the water and wastewater industry. Every lifting operation must comply with safety, environmental, and operational standards, while often being carried out in complex environments such as treatment works, pumping stations, and confined spaces.

These compliance demands can add planning constraints, reduce flexibility, and increase project delays if the right equipment is not available. Reid helps organizations meet these challenges through a range of portable lifting and safety solutions that are designed, tested, and certified to recognized standards. Backed by rigorous product testing, independent verification, and internationally recognized management systems, Reid products provide the confidence that lifting, access, rescue, and fall protection activities can be completed safely and compliantly.

When the weight and size of materials is unknown or different from previous work sites, operators must work more slowly and cautiously, often adding extra support, rethinking access methods, or limiting the number of workers and materials in an area.

This uncertainty increases the risk of accidents, project delays, and costly damage. It also complicates planning and sequencing, as engineers may need to carry out additional inspections, testing, or calculations before work can proceed. Overall, this drives up costs, extends timelines, and introduces significant safety and logistical challenges across the project.